Because of the risk of strangulation to young children associated with certain window covering cords, the Commission determined (at 16 CFR part 1120) that window coverings that do not meet applicable sections of ANSI/WCMA A100.1-2018 are a substantial product hazard under section 15(j) of the Consumer Product Safety Act (CPSA). The determination adds stock and custom window coverings to the “substantial product hazard” list at 16 CFR §§ 1120.3(e) and 1120.3(f), respectively. Stock and custom window coverings must meet the following provisions, as applicable: For stock window coverings, operating cords must be cordless (includes motorized operating systems), short (8 inches or less), or inaccessible. For stock and custom window coverings with inner cords, the inner cord must be inaccessible or too short to form a hazardous loop when tested pursuant to the requirements in sections 4.5, 6.3, 6.7, and Appendices C and D of ANSI/WCMA A100.1-2018 Stock and custom window coverings must have a permanent label or marking located within or on the headrail, or on the roller tube, of all finished window coverings identifying certain information listed in section 5.3 of ANSI/WCMA A100.1-2018